Intelligent Lift Device / G-Force

• Available in 165#, 330#, and 660# capacity
• G360 collector and swivel assembly
• Remote mount auxiliary I/O block mounted below the handle
• Auxiliary 24 volt power supply to drive input/outputs and other sensors
• Virtual limits and points of speed reduction is standard
• Capable of operating two units with one handle
• Capable of operating one unit with two different handle locations
• Standard controls for easy upgrades
• Handle configurations are easily changeable in the field
• Standard coil cords with in-field add-on air hose
• Slide and pendant handles are interchangeable between the Q and iQ
• More processing power for smooth operation and improved performance
• Improved float mode allows for better control of the load
• LCD on hand controller communicates more information like system status and diagnostics
• Seamless operator present function by means of a photo sensor
• Ergonomic Slide handle design
• Higher environmental ratings (more tolerant to dust and liquid)
• Electric/air collector is standard eliminating coil cord damage
• Pendant handle available
• Optional standard auxiliary air valves and electric switches for hand controller make tooling integration easier
• Standard Input/Output functionality makes the product suitable for more applications out of the box
• Ease of installation for reduced installation time & costs
• Readily accepted by operators because its easy to use and enhances their job performance
• Rapid return on investment through increased productivity and reduced product damage
• Decreases risk of operator injury creating a safer work environment

Ingersoll Rand Air Balancers

Today's material handling applications require an ergonomic lift assist that interacts with the operator and multiplies his/her effort. The Balancer offers lifting solutions to meet these needs through "float" and built-in safety features. Ideal applications include tool balancing, weld gun suspension, and fixture suspension. IR offers 5 models of the Pneumatic Balancer that have a load capacity between 50 to 2000 lbs. (22 to 909 kg). Cable travel in terms of up/down movement varies from 40 to 120 inches (1016 to 3048mm) depending on the model. Balancer suspension kits can accomodate enclosed track, I-Beam, patented track, and hook mount. An optional Z stop offers protection against the drifting of loads in the event the main air supply is interrupted. See Ergonomic Handling Systems catalog for details. Three type of controls are provided depending on application - BA, ZA, or EA.

Model "BA"
The "BA" control options have no pendant control and are used for either single load suspending applications at a given height or single load application where both hands are used to manually raise, lower and position "Float" a load with virtually no part weight or resistance to the operator. The "BA" controller is a self-relieving regulator that automatically adds or exhausts air to raise or lower (float) the load to the desired height where it will remain suspended. The regulator can also be adjusted to slowly raise a load up and out of an operators way.

Model "ZA"
The "ZA" pendant control is the most popular and is designed for high speed precision handling of variable weight loads. Up/down movement is accomplished through the use of an ergonomically designed pendant with low-effort, color coded thumb levers. After positioning the load with the pendant control, the unit defaults into a "Float" mode that allows the operator up to 18 inches to manually adjust the load to final position.

Model "EA"
The EA controls are used constant weight repetitive parts handing within a 40 lb. range that need operator handling of the parts similar to loading a machine tool. The selector switch has three modes that the operator uses in sequence. The operator attaches the end effecter or hook to the part and switches to "Hi-load" which then automatically lifts the load for transfer. The operator then switches to "Lo-load" which allows the operator to float the part up or down into position with virtually no force required on the component. When the part is in final position, the operator then switches the mode to "Un-load" to release the part from the handling device or hook.

Electric Chain Hoists

• 1/8 to 5 ton capacities (125 -5000 kg).  
• Choice of 3 standard mounting configurations: fixed top hook, push trolley and motorized trolley (custom mounting configurations also available).
• 10, 15 and 20 ft. lifts standard; additional lifting heights available up to 150 ft. single fall, 75 ft. two fall.
• Lift speeds from 8 to 32 FPM single-speed, 12/3 to 64/16 FPM two-speed, 1 - 16 to 4 - 64 FPM variable speed inverter, 0.16 to 5.7 HP hoist motors.
• Variable speed, three phase models with hoist inverter control available for 1/2 - 2 ton capacity LM10 models and for 460/3/60 power supply only.
• Hoists available for single phase and three phase.
• Two speed, three phase hoist motors and controls available for all models and for 208, 230, 460, 575/3/60 or 380/3/50 power supply.
• Single speed, three phase hoist motors and controls available for LM05 and LM10 models and reconnectable for 208, 230 or 460/3/60 power supply.
• 115 volt single phase hoists - single speed only.
• Three phase hoist motors are class F insulated, 50% effective duty rated.
• Two-speed TMU trolley drive unit (trolley speed is 80/20 FPM). Trolley brake, drop lugs and bumpers are standard. Variable frequency drive option on TMU.
• Trolley control panel integrally mounted to the motor.

Wire Rope Hoists

Standard configurations include normal headroom, low headroom and double girder trolley designs. Hoists in short ton ratings (ASME) or metric ratings (FEM)
meet a wide variety of application requirements:

• 1/2 - 80 ton (500 - 80,000 kg) capacities
• Lifts starting at 13ft (4m) to 320ft (100m) and beyond
• Lifting speed range 10/1.5 to 62/10 fpm (3/0.5 - 19/3 m/min)
• 208, 230, 460, 575/3/60 or 380/3/50 power supply
• Single-reeved or double-reeved