|
|
Multi-Strand Transfer Conveyors
|
|
This specialty transfer conveyor transfers products at 90-degrees. The transfer is mounted below the top of the conveyor roller and is raised pneumatically to move the strands above the top of chain guard to transfer product 90 degrees. The transfer is reversible and includes a driven relief section to bridge the transition to chain conveyor, which provides the conveyed product a smooth transition.
|
|
Heavy duty chain driven live roller conveyor, model 297CDLR, features cutouts in side frame for mounting 2-strand 90-degree chain transfer. A product is transferred 90 degrees from or to the chain driven live roller conveyor via chain transfer conveyor. Chain transfers are commonly used in tight quarters where use of large-radius 90 or 180-degree curves is not feasible. Chain transfers may also be utilized to station several conveyor lines side-by-side and mount a common chain transfer across each conveyor line to transfer product to or from any pre-determined conveyor line.
|
|
|
Chain transfers move products at 90-degree angles. This unit features five strands to accommodate numerous product sizes. This transfer sits mounted below the top of the conveyor roller and is raised pneumatically to move the strands above the top of roller to transfer product 90 degrees.
|
|
|
Chain transfer shown above is designed to mount within a conveyor frame (BF). This small transfer includes No. 60 chain and positive lift device. Transfer is raised pneumatically to move the strands above the top of roller to transfer product at 90 degree intervals.
|
|
This 2-strand chain transfer moves product 90 degrees and is mounted in model 297CDLR. Reversible with center drive, this transfer includes positive lift allowing both ends of the transfer to raise approximately the same amount when transferring product. The new design of this transfer allows 6-inch roller centers on the CDLR conveyor in which the transfer is mounted.
| |
| |
Applied Handling Systems, LLC, 6175 Hickory Flat Hwy, Suite 110-174, Canton, GA 30115 1-866-592-2404 I Phone: 770-924-4431 I Fax: 770-924-4321 I e-mail us |
| | |
 Copyright 2009 Applied Handling Systems, LLC. All rights are reserved
|
